Climbing foundations throws you back

[Belteyn]

Basic Info:

Platform: Steam
Issue Type: Gameplay
Game Mode: Online Official
Server Type: PvE
Map: Isle of Siptah
Server Name: 6013
Mods: None

Bug Reproduction:

Climb some sandstone foundations. As you reach the top expectation is your character starts walking on the flat surface above. Instead is character is thrown back of the foundation momentarily and you have to repeat last bit of the climb again. Can take 2-3 attempts to actually start moving normally after the climb. Not tested on other materials. This is climbing normal foundations - no walls or fences etc…

[Belteyn]

Ok so I think these are also related to this bug:

Janky Character "Positioning" When on the Edge of Things

Basic Info: Platform: PC Storefront: Steam Issue Type: Gameplay Game Mode: Online Private Server Type: PvE Mods: None Bug Description: Janky character “positioning” when on the edge of things. See the screenshot examples below. [Example 1] This occurs when your character gets too close to the edge of a building foundation. Rather than staying on the edge of it like they used to before 3.0, they now sink down onto the side of it. [Example 2] Here’s an example of it happening with d…

Reinforced stone foundations glitched, falling through

[20220905155814_1] falling through reinforced stone foundations, something wrong with the edges or something, had to replace all my rs foundations to stop bouncing up and down while walking across them - didn’t reoccur with any other foundations, but kept recurring if i put back the reinforced stone; i used creative mode to do the editing in all cases. (and before you ask, no, i was not in “ghost” mode or whatever, that’s in-game, non-admin mode, after replacing existing sandstone foundations …

My theory is this:

If a character is climbing foundations and the edge of the foundations are not being recorngized correctly, then this would cause the ‘jump back’ animation I’m experiencing, as the character is climbing up onto an initial edge surface that is not being recognized, therefore character appears to fall back.

[Dzonatas]

It’s known. It was not fixed in the few last updates.

[r3dsonj4]

exactly like that. i even left some reinforced stone on edges (so the walls would at least be strong) and yes, on that corner, if i go right on the edge of the foundation, i fall through (and it ends up looking like my character is dangling from her boobs on the edge of it since she’s partially inside it). i only noticed this with the reinforced stone, after testing all the other foundations as well

[r3dsonj4]

ah ok. good.

this one thing about it seems a bit telling, i was curious to see it again, so i went to the reinforced stone foundation that was attached only to one other such foundation on one side, adjacent to no other reinforced stone, with the rest having been replaced with insulated wood so i would stop falling through. when i went on the edge i didn’t fall through it as before. so out of curiosity and disbelief i replaced all the insulated wood with reinforced stone again, but i started falling through the floor again, and on the reinforced stone foundation which i mentioned earlier, which was still connected only to one other on one side, but was now adjacent to another newly replaced one (diagonally adjacent), i started falling through again.

edit well, wait, now it’s happening on the edge of that one reinforced stone foundation despite the diagonally adjacent insulated wood one having been put back, even after exiting to the main menu and going back in. but i swear it wasn’t doing it just a while ago… i’m so confused…

[biggcane55]

It actually got worse. Now the camera tilt trick doesn’t work. Must have been (the camera trick) an exploit like fence stacking lol.