[BUG?] Pillars on foundation junctions built to support stairs seem to not be transferring stability upwards

Game mode: Single player - Dedicated Server
Problem: Bug
Region: South-America

As the title explains… if you build a stair made of several stair pieces, each of them progressively get less stability. In my case, a 3-piece stair… first one is at 75, second at 50 and last one at 25.

You then attach pillars to the stairs at the junctions and extend the pillars to the foundation below… check them with the repair hammer and they say 100 stability, and hence the stairs too are at 100 stability.

Then you restart the server.

Check again and see now… is like the pillars aren’t there… we’re back again at 75, 50 and 25 stability on the stairs AND the pillars, like they’re transferring stability from above and not from below.

The only thing strange about this setup is that the pillars are build upon the junctions between foundations.

Steps on how to reproduce issue:

  1. Build a three or two piece stair over foundations
  2. Check the stability on each piece, 75, 50, 25
  3. Add pillars to the unions/junctions… check stability now: 100, 100, 100
  4. Restart server and check stability now: 75, 50, 25 again
1 Like